• Out of stock
Antec Performance 1 FT Gaming Case w/ Glass Side Panels, E-ATX, 4 PWM Fans, CPU/GPU Temp Display, iUnity Monitoring Software, US
search
  • Antec Performance 1 FT Gaming Case w/ Glass Side Panels, E-ATX, 4 PWM Fans, CPU/GPU Temp Display, iUnity Monitoring Software, US

Antec Performance 1 FT Gaming Case w/ Glass Side Panels, E-ATX, 4 PWM Fans, CPU/GPU Temp Display, iUnity Monitoring Software, US

£115.06
VAT included
Stock status: Out of stock
Out of stock
Quantity
Out of stock




Full Tower E-ATX Highly Compatible Gaming Case

  • CPU/GPU Temperature Display
  • Antec iUnity Software for instant data on PC specs
  • USB Type-C (10Gbps) 
  • 4mm Tempered Glass Side Panels
  • 4x 30mm Thick Pre-Installed Storm T3 PWM Fans
  • Airflow-enhancing Mesh Front Panel
  • Supports RTX 40 Series Graphics Cards
  • Thoughtful Design Features
  • Modular Drive Trays





CPU/GPU Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display. 

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button. 
 
Note: The Antec iUnity software must be installed.
 
 

 

 
Antec iUnity 
 
The Antec iUnity Software provides instant data on PC specs, loads, and usage.
 



 
I/O Panel 
  • Including the mainstream USB Type-C (10Gbps) port for high-speed transfer
  • Included dust plugs for dust prevention.
  • Mic/Audio 2-in-1 port
 

 

 
4mm Tempered Glass Side Panels
 
Both side panels adopt tempered glass for better PC showcase visual effects.
 

 


 
Cable Management On Point 
 
2 cable covers are included for beautifying the cable management area. 
 
There are ten sets of velcro straps for easy cable management:
 
 - Three sets of velcro straps for fan & I/O cable routing
 - Five velcro straps for hardware and power supply cables
 - Two velcro straps at the rear for rear I/O cable routing.
 
 
 

 
 
30mm Thick Pre-Installed Storm T3 PWM Fans
  • 3 x Storm T3 140mm PWM Fans at the Front
  • 1 x Storm T3 120mm PWM Fan at the Rear
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake. 

The PWM function easily reaches the balance between cooling and silence.
 
 

 

 
Exquisite Steel Mesh 
 
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
 
 
 


 
Best Airflow Path For GPU Cooling 
 
Airflow-enhancing mesh front panel provides massive air. 
 
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling
 
 



 
Dust Filters
  • Top: Magnetic dust filter
  • Front: Magnetic & clip-on dust filter
  • Bottom: Full-sized pull-out dust filter.
 
 


 
Supports RTX 40 Series Graphics Cards 
 
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
 
 

 
 
 
Thoughtful Design
  • Stud for Fixing - The stud for fixing design provides a more convenient PC-DIY experience. 
  • Back-Mounted PSU Bracket - For easy installation. 
  • Drop-Proof Bolt - The drop-proof hook design avoids side panel damage. 
  • Rubber Grommets - 4 included rubber grommets for cable routing. 
  • 8 x Fully Open PCIe Slots - Bridgeless design supports vertical GPU installation. 
  • Rear Velcro Straps - For the rear I/O cable routing.
 
 

 
 
Best Cooling Design 
  • Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm)
  • Supports 360mm radiators at the front and top simultaneously
  • Up to 10 fans simultaneously
 
 

 
 
Modular Drive Trays 

Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD
 
 

 
 
 
Case Compatibility - Extensive Interior 
  • Motherboard support: E-ATX(up to 285 mm), A TX, Micro-ATX, ITX
  • CPU cooler max height: 175 mm
  • GPU max length: 400 mm
  • Power Supply max length: 245 mm (with HDD) /  440 mm (without HDD)
 
0-761345-10091-5

Data sheet

.
Radiator Options:Front: Up to 420 mmTop: Up to 360 mmRear: 120 mm
Warranty
2 Years
Form Factor
E-ATX
Additional Features
See Overview / Video
Colour
White
Weight/Dimensions
12.55 kg(DxWxH) 522 x 230 x 522 cm
Material
Steel & Plastic4mm Tempered Glass Side Panels
Power Supply Wattage
No PSU
Motherboard Support
E-ATX up to 285mm, ATX, Micro ATX, Mini ITX
Connectors / Controls
1 x USB 10Gbps Type-C2 x USB 3.0Audio I/OTemp. Display Switch
Drive Bays
3 x 2.5"2/2 x 3.5"/2.5" Drive Mounts
LED Lighting
Yes (LED Lighting)
Compatability
GPU max length:400 mm CPU cooler max height:175 mm PSU max length:245 mm (with HDD)440 mm (without HDD)
Small Form Factor
No
Expansion Slots
8 Expansion Slots
Cooling System
Included Fans: Front: 3 x Storm T3 PWM 140mm fansRear: 1 x Storm T3 PWM 120mm fanFan Mounts:Front: 3 x 120 / 3 x 140 mmTop: 3 x 120 / 3 x 140 mmRear: 1 x 120 mmPSU Shroud: 3 x 120 mm
Window(s)
Yes (Window)
Comments (0)
No customer reviews for the moment.